IPC6512-Z30&6522-Z30
User Guide
5.1 Power-up Action
After the power is applied, the speed dome will perform self-test actions. It begins with lens
actions and then pan and tilt movement. After the power-up self-test actions, there will be texts
prompted on the live view image that power-up action is finished.
5.2 Login
The procedure for web login is as follows:
Step 1 Open an Internet Explorer webpage.
Step 2 In the browser address bar, enter the IP address of the speed dome, for example, 192.168.0.64.
Step 3 Enter the user name and password, as shown in
Issue 02 (2014-12-25)
NOTE
The default user name is admin, and the default password is HuaWei123. Change the password when you
log in to the system for the first time to ensure system security. The password must contain eight characters
consist of upper-case letters, lower-case letters, and numeric.
If you enter an incorrect password three consecutive times, your account gets locked. You must wait for
five minutes to enter the login information.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5
Basic Operation
Figure
5-1.
5 Basic Operation
18