Table of Contents
Advertisement
IPC6512-Z30&6522-Z30
User Guide
Figure 8-24 Configure Video Settings
Step 2 Select the Stream Type of the dome to main stream (normal), sub-stream or third stream.
The main stream is usually for recording and live viewing with good bandwidth, and the sub-
stream and third stream can be used for live viewing when the bandwidth is limited.
Step 3 You can customize the following parameters for the selected main stream or sub-stream.
l Video Type
l Resolution
l Bitrate Type
l Video Quality
l Frame Rate
l Max. Bitrate
l Video Encoding
Issue 02 (2014-12-25)
Select the stream type to video stream, or video & audio composite stream. The audio signal
will be recorded only when the Video Type is Video & Audio.
Select the resolution of the video output. The higher resolution corresponds to the higher
bandwidth requirements on the network.
Select the bitrate type to constant or variable.
When bitrate type is selected as Variable, 6 levels of video quality are selectable. The higher
quality corresponds to the higher bandwidth requirements on the network.
Set the frame rate to 1/16~25 fps. The frame rate is to describe the frequency at which the
video stream is updated and it is measured by frames per second (fps). A higher frame rate
is advantageous when there is movement in the video stream, as it maintains image quality
throughout.
Set the max. bitrate to 32 Kbps ~16384 Kbps. The higher value corresponds to the higher
video quality, but the higher bandwidth is required.
When the Stream Type of the dome is main stream, the Video Encoding standard can be set
to H.264.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Speed Dome Configuration
57
Advertisement
Table of Contents
