Table of Contents
Advertisement
IPC6512-Z30&6522-Z30
User Guide
l
Day/Night Switch
l
l
Issue 02 (2014-12-25)
– Auto: The speed dome focuses automatically at any time according to objects in the
scene.
– Semi-auto: The speed dome focuses automatically only once after panning, tilting and
zooming.
– Manual: In Manual mode, you need to use
focus manually.
NOTE
At night, the image may be defocused under auto focus mode. Please reduce lights and make
sure that the lights in the scene are stable. You can also zoom in the image to reduce the lights
in the image.
Min. Focus Distance
This function is used to limit the minimum focus distance. The value can be set to 1.5m,
3m, 6m, 10cm and 50cm.
NOTE
The minimum focus value varies depending on the models of speed dome.
Day/Night Switch
The Day/Night Switch mode can be set to Auto, Day and Night.
– Auto: In Auto mode, the day mode and night mode can switch automatically according
to the light condition of environment. The switching sensitivity can be set to Low,
Normal and High. The higher the sensitive level is, the more easily the day/night switch
will be triggered.
Figure 8-31 Day/Night Switch
– Day: In Day mode, the speed dome displays color image. It is used for normal lighting
conditions.
– Night: In Night mode, the image is black and white. Night mode can increase the
sensitivity in low light conditions.
NOTE
This function varies depending on the models of speed dome.
Figure 8-32 Schedule mode
Smart IR
If the IR light is on and the image center is overexposure, you can enable this function.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Speed Dome Configuration
on the control panel to
62
Advertisement
Table of Contents
