Table of Contents
Advertisement
IPC6512-Z30&6522-Z30
User Guide
----End
8.4.4 Configuring DDNS Settings
If your dome is set to use PPPoE as its default network connection, you can use the Dynamic
DNS (DDNS) for network access.
Before you start
Before you start, registration on the DDNS server is required before configuring the DDNS
settings of the dome.
Step 1 Enter the DDNS Settings interface: Configuration > Advanced Configuration > Network >
DDNS.
Figure 8-11 DDNS Settings
Step 2 Check the Enable DDNS checkbox to enable this feature.
Step 3 Select DDNS Type. Three DDNS types are selectable: IPServer and DynDNS.
----End
DynDNS
Step 1 Enter Server Address of DynDNS (e.g. members.dyndns.org).
Step 2 In the Domain text field, enter the domain name obtained from the DynDNS website.
Step 3 Enter the Port of DynDNS server.
Step 4 Enter the User Name and Password registered on the DynDNS website.
Step 5 Click
Issue 02 (2014-12-25)
NOTE
It asks for a reboot for the settings to take effect.
to save the settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Speed Dome Configuration
46
Advertisement
Table of Contents
