Table of Contents
Advertisement
IPC6512-Z30&6522-Z30
User Guide
Figure 7-7 Draw the Privacy Mask
Step 2 Click the PTZ control buttons to find the area you want to set the privacy mask.
Step 3 Click
Step 4 You can drag the corners of the red rectangle area to draw a polygon mask.
Step 5 Click
without saving them.
Step 6 Click
area; you can select a mask and click
Figure 7-8 Privacy Mask List
Step 7 Check the checkbox of Enable Privacy Mask to enable this function.
----End
7.7 Clearing PTZ Configurations
You can clear PTZ configurations in this interface, including all presets, patrols, patterns, privacy
masks, PTZ limits and scheduled tasks.
Issue 02 (2014-12-25)
click and drag the mouse in the live video window to draw the area.
to finish drawing or click
to save the privacy mask, and it will be listed in the Privacy Mask List
NOTE
You are allowed to draw up to 24 areas on the same image.
The phenomenon of visual delay (2~4 seconds) may happen while dragging the privacy mask area.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 PTZ Configuration
to clear all of the areas you set
to delete it from the list.
37
Advertisement
Table of Contents
