Configuring Park Actions; Configuring Privacy Mask - Huawei IPC6512-Z30 User Manual

IPC6512-Z30&6522-Z30
User Guide
----End

7.5 Configuring Park Actions

This feature allows the dome to start a predefined park action (scan, preset, pattern and etc.)
automatically after a period of inactivity (park time).
Step 1 Enter the Park Action Settings interface: Configuration > Advanced Configuration> PTZ >
Park Action.
Figure 7-6 Set the Park Action
Step 2 Check the checkbox of Enable Park Action.
Step 3 Set the Park Time as the inactivity time of the dome before it starts the park actions.
Step 4 Choose Action Type the from the drop-down list.
Step 5 Click
----End

7.6 Configuring Privacy Mask

Privacy mask enables you to cover certain areas on the live video to prevent certain spots in the
surveillance area from being live viewed and recorded.
Step 1 Enter the Privacy Mask Settings interface: Configuration > Advanced Configuration> PTZ
> Privacy Mask.
Issue 02 (2014-12-25)
NOTE
The time of each task can't be overlapped. Up to 10 tasks can be configured for each day.
NOTE
Scheduled Tasks function is prior to Park Action function. When these two functions are set at the same
time, only the Scheduled Tasks function takes effect.
to save the settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 PTZ Configuration
36