Table of Contents
Advertisement
IPC6512-Z30&6522-Z30
User Guide
Figure 8-17 FTP Settings
Step 2 Configure the FTP settings; and the user name and password are required for login the FTP
server.
l Directory: In the Directory Structure field, you can select the root directory, parent directory
l Upload type: To enable uploading the captured picture to the FTP server.
l Anonymous Access to the FTP Server (in which case the user name and password won't be
Step 3 Click
----End
8.4.9 Configuring UPnP™ Settings
Universal Plug and Play (UPnP™) is a networking architecture that provides compatibility
among networking equipment, software and other hardware devices. The UPnP protocol allows
devices to connect seamlessly and to simplify the implementation of networks in the home and
corporate environments.
With the function enabled, you don't need to configure the port mapping for each port, and the
dome is connected to the Wide Area Network via the router.
Issue 02 (2014-12-25)
and child directory. When the parent directory is selected, you have the option to use the
Device Name, Device Number or Device IP for the name of the directory; and when the Child
Directory is selected, you can use the Camera Name or Camera No. as the name of the
directory.
requested.): Check the
server.
NOTE
The anonymous access function must be supported by the FTP server.
to save the settings.
NOTE
If you want to upload the captured pictures to FTP server, you have to enable the continuous snapshot or
event-triggered snapshot on Snapshot page. For detailed information, please refer to the
Snapshot
Settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
checkbox to enable the anonymous access to the FTP
8 Speed Dome Configuration
9.3 Configuring
51
Advertisement
Table of Contents
