Table of Contents
Advertisement
IPC6512-Z30&6522-Z30
User Guide
Task 3: Set the Alarm Actions for Motion Detection
You can specify the linkage method when an event occurs. The following contents are about
how to configure the different types of linkage method.
Figure 8-43 Linkage Method
Check the checkbox to select the linkage method. Audible warning, notify surveillance center,
send email, upload to FTP, trigger channel and trigger alarm output are selectable (Optional).
l
l
l
l
l
l
8.7.2 Configuring Video Tampering Alarm
You can configure the dome to trigger the alarm when the lens is covered and take alarm response
action.
Step 1 Enter the video tampering Settings interface: Configuration > Advanced Configuration >
Events > Video Tampering.
Issue 02 (2014-12-25)
Audible Warning
Trigger the audible warning locally.
Notify Surveillance Center
Send an exception or alarm signal to remote management software when an event occurs.
Send Email
Send an email with alarm information to a user or users when an event occurs.
NOTE
To send the Email when an event occurs, you need to refer to
to set the related parameters.
Upload to FTP
Capture the image when an alarm is triggered and upload the picture to a FTP server.
NOTE
Set the FTP address and the remote FTP server first. Refer to
detailed information.
Trigger Channel
The video will be recorded when the motion is detected. You have to set the recording
schedule to realize this function. Please refer to
detailed information.
Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Speed Dome Configuration
8.4.11 Configuring Email Settings
8.4.8 Configuring FTP Settings
9.2 Configuring Recording Schedule
for
for
70
Advertisement
Table of Contents
