IPC6512-Z30&6522-Z30
User Guide
Figure 8-8 TCP/IP Settings
Step 2 Configure the basic network settings, including the NIC Type, IPv4 or IPv6 Address, IPv4 or
IPv6 Subnet Mask, IPv4 or IPv6 Default Gateway, MTU settings and Multicast Address.
Step 3 Click
----End
8.4.2 Configuring Port Settings
You can set the port No. of the dome, e.g. HTTP port, RTSP port and HTTPS port.
Step 1 Enter the Port Settings interface: Configuration > Basic Configuration > Network > Port
or Configuration > Advanced Configuration > Network > Port.
Issue 02 (2014-12-25)
NOTE
The valid value range of MTU is 500 ~ 1500. The Multicast sends a stream to the multicast group address
and allows multiple clients to acquire the stream at the same time by requesting a copy from the multicast
group address. Before utilizing this function, you have to enable the Multicast function of your router.
to save the above settings.
NOTE
It asks for a reboot for the settings to take effect.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Speed Dome Configuration
44