IPC6512-Z30&6522-Z30
User Guide
9.1 Configuring NAS Settings
Before you start, the network disk should be available within the network and properly
configured to store the recorded files, log files, etc.
Add the network disk
Step 1 Enter the NAS (Network-Attached Storage) Settings interface: Configuration > Advanced
Configuration > Storage > NAS.
Step 2 Select the NAS type as NFS or SMB/CIFS. If you select SMB/CIFS, you need to enter the User
Name and Password. You can click Test to confirm the availability of the NAS Storage.
Figure 9-1 Add Network Disk
Step 3 Enter the IP address of the network disk. The default NFS storage format of file path is /dvr/
test as shown in following figure. And the default SMB/CIFS storage format of file path is /
test.
Figure 9-2 Add Network Disk
Issue 02 (2014-12-25)
NOTE
Please refer to the User Manual of NAS for creating the file path.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9
Storage Settings
9 Storage Settings
76