Table of Contents
Advertisement
IPC6512-Z30&6522-Z30
User Guide
4.2 Connecting a Speed Dome over the Internet
Purpose
This section explains how to connect the network speed dome to the WAN with a static IP or a
dynamic IP.
4.2.1 Static IP Connection
Before you start, obtain a static IP address from your Internet Service Provider (ISP).
With the static IP address, you can connect a speed dome to the Internet directly or through a
router.
Connecting the network speed dome via a router
Step 1 Connect the network speed dome to the router.
Step 2 Assign a LAN IP address, the subnet mask and the gateway.
Step 3 Save the static IP in the router.
Step 4 Set port mapping, E.g., 80, 8000 and 554 ports. The steps for port mapping vary depending on
different routers. Please call the router manufacturer for assistance with port mapping.
Step 5 Visit the network speed dome through a web browser or the client software over the internet.
Figure 4-3 Accessing the Speed Dome through Router with Static IP
----End
Connecting the network speed dome with static IP directly
You can also save the static IP in the speed dome and directly connect it to the internet without
using a router.
Figure 4-4 Accessing the Speed Dome with Static IP Directly
Issue 02 (2014-12-25)
NOTE
Refer to
D Port Mapping
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
for port mapping details.
4 Network Connection and Setup
14
Advertisement
Table of Contents
