Table of Contents
Advertisement
IPC6512-Z30&6522-Z30
User Guide
Button
6.3.2 Setting / Calling a Preset
A preset is a predefined image position. For the defined preset,you can click the calling button
to quickly view the desired image position.
Setting a Preset
Step 1 In the PTZ control panel, select a preset number from the preset list.
Figure 6-5 Setting a Preset
Step 2 Use PTZ control buttons to move the lens to a desired position.
You can perform any of the following operations:
l Pan the dome to the right or left.
l Tilt the dome up or down.
l Zoom in or out.
l Refocus the lens.
Step 3 Click
The configured preset can be deleted by clicking
----End
Calling a Preset
In PTZ control panel, select a defined preset from the list and click
For convenient preset selection, refer to the following steps to navigate to the preset you want.
Issue 02 (2014-12-25)
to save the preset.
NOTE
Click the preset name and you can edit the preset name with less than 20 characters.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Iris open/close
Adjust speed of pan/tilt movements
.
6 Live View
to call a preset.
25
Advertisement
Table of Contents
