Table of Contents
Advertisement
IPC6512-Z30&6522-Z30
User Guide
Step 1 Enter the UPnP™ settings interface: Configuration >Advanced Configuration > Network >
UPnP.
Step 2 Check the checkbox to enable the UPnP™ function.
You can edit the Friendly Name of the speed dome. This name can be detected by corresponding
device, such as a router.
Figure 8-18 Configure UPnP Settings
----End
8.4.10 Configuring NAT Settings
Refer to the following steps to configure NAT settings.
Step 1 Set the port mapping mode.
l To port mapping with the default port numbers
l To port mapping with the customized port numbers
And you can customize the value of the port number by yourself.
Figure 8-19 Modify the Port
Step 2 Click
----End
8.4.11 Configuring Email Settings
The system can be configured to send an Email notification to all designated receivers if an alarm
event is detected, e.g., motion detection event, video loss, video tampering, etc.
Before you start, Please configure the DNS Server settings under Basic Configuration >
Network > TCP/IP or Advanced Configuration > Network > TCP/IP before using the Email
function.
Issue 02 (2014-12-25)
Choose
Choose
to save the settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Speed Dome Configuration
52
Advertisement
Table of Contents
