Huawei IPC6131-WD-A User Manual
Hide thumbs Also See for IPC6131-WD-A:
Table of Contents

Advertisement

IPC6131-WD-A&6123-WDL-A&6232-IR&6212-
IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR
V100R001C00
User Guide
Issue
02
Date
2014-12-25
HUAWEI TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Summary of Contents for Huawei IPC6131-WD-A

  • Page 1 IPC6131-WD-A&6123-WDL-A&6232-IR&6212- IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR V100R001C00 User Guide Issue Date 2014-12-25 HUAWEI TECHNOLOGIES CO., LTD.
  • Page 2 All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope.
  • Page 3: About This Document

    About This Document Purpose This document introduces the installation and the operation guides of following Network Camera. Network Box Camera: IPC6131-WD-A, IPC6123-WDL-A. Network Bullet Camera: IPC6232-IR, IPC6212-IR, IPC6231-WD-VRZ. Network Dome Camera: IPC6332-MIR, IPC6311-IR, IPC6331-IR. Intended Audience This document is intended for:...
  • Page 4: Change History

    Change History Issue Date Description 2014-12-25 This is the first release. 2014-05-05 This issue is used for first office application (FOA). Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 5: Table Of Contents

    3.2.4 Pole Mounting................................11 3.3 Installation of IPC6232-IR & 6212-IR Bullet Camera....................14 3.3.1 Overview...................................14 3.3.2 Wall Mounting................................15 3.3.3 Pole Mounting................................16 3.4 Installation of IPC6131-WD-A & 6123-WDL-A Box Camera..................19 3.4.1 Overview...................................19 3.4.2 Lens Installation................................22 3.4.3 SD Card Installation..............................22 3.4.4 Pendant Installation..............................22 3.4.5 Wall Mounting................................25 3.4.6 Wall Mounting with Housing............................27...
  • Page 6 8.3.5 Configuring SNMP Settings............................78 8.3.6 Configuring 802.1X Settings.............................80 8.3.7 Configuring QoS Settings............................80 8.3.8 Configuring FTP Settings............................81 8.3.9 Configuring UPnP™ Settings............................82 8.3.10 Configuring Email Settings.............................82 8.3.11 Configure NAT Settings............................83 Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 7 12.5 Maintenance................................125 12.5.1 Rebooting the Camera............................125 12.5.2 Restoring Default Settings.............................125 12.5.3 Exporting /Importing Configuration File......................126 12.5.4 Upgrading the System............................126 12.6 RS-232 Settings................................127 12.7 RS-485 Settings................................128 12.8 Service Settings................................128 Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 8 14.5 Specification of IPC6123-WDL-A...........................138 14.6 Specification of IPC6332-MIR..........................139 14.7 Specification of IPC6331-IR............................140 14.8 Specification of IPC6311-IR............................141 A Network Cable Connection....................143 B Port Mapping..........................145 C Acronyms and Abbreviations....................147 Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 9: Security Precautions

    The warranty does not cover any failure of the device due to improper transportation. Do not install the device upside down. Do not squeeze the device. Move the device chip gently. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 10 Products and services are subject to change without notice. l For the latest program and supplementary documentation, contact Huawei customer center. l For any questions about the camera, contact the sales person or Huawei customer center. l Huawei is not responsible for your misoperation.
  • Page 11: Product Description

    Network surveillance for ATM room, cashier, super market, and factory. Nursing house, kinder garden, school, and house. Integrated with access control system. Power station, BTS, and other unattended stations. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 12 IPC6131-WD-A&6123-WDL-A&6232-IR&6212- IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR User Guide 2 Product Description Pipeline, warehouse; Airport, train station, bus stop. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 13: Camera Installation

    IR LEDS. Fasten the dome cover to camera body so that the foam ring and the dome cover are attached seamlessly. 3.2 Installation of IPC6231-WD-VRZ Bullet Camera 3.2.1 Overview The overview of IPC6231-WD-VRZ network bullet camera is shown below. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 14 IP address, port No., etc. l Some of the models support audio and alarm functions. The interfaces are shown as follows. Figure 3-2 Backpanel Interface Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 15: Sd Card Installation

    Step 5 Rotate the front cover clockwise back to the camera and install the sun shield according to the arrow direction as shown in Figure 3-4 (right). Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 16: Wall Mounting

    Step 1 Drill the screw holes and the cable hole in the ceiling according to the supplied drill template. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 17 Step 3 Fix the junction box to the wall with the expansion screws. Figure 3-7 Install the Junction Box Step 4 Route the cables of the camera. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 18 Step 7 Loosen the screws on the bracket to adjust the camera to the desired surveillance angle and then tighten the screws to fix the camera. Figure 3-9 Adjust Monitoring Angle Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 19: Pole Mounting

    Step 1 Rotate the screws on the hoop anti-clockwise to loosen it. Figure 3-11 Loosen the screws on the hoop Step 2 Route the hoop through the hole of the installation plate. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 20 Step 3 Install the hoop on the pole and rotate screws clockwise until they are fasten. Figure 3-13 Install the hoop Step 4 Install the camera bracket on the installation plate. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 21 IPC6131-WD-A&6123-WDL-A&6232-IR&6212- IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR User Guide 3 Camera Installation Figure 3-14 Install the bracket Step 5 Install the camera on the bracket. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 22: Installation Of Ipc6232-Ir & 6212-Ir Bullet Camera

    Figure 3-15 Install the camera on the bracket ----End 3.3 Installation of IPC6232-IR & 6212-IR Bullet Camera 3.3.1 Overview The overview of IPC6232-IR network bullet camera is shown below. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 23: Wall Mounting

    Network Interface (PoE) Alarm Interface Audio Interface 3.3.2 Wall Mounting Step 1 Attach the drill template (supplied) to the wall where the camera is to be mounted. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 24: Pole Mounting

    Figure 3-18 Fix the Camera to the Wall ----End 3.3.3 Pole Mounting NOTE The pole must be able to withstand 3 times the weight of the camera, bracket and shield. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 25 Figure 3-20 Route the hoop through the hole of the plate Step 3 Install the hoop on the pole and rotate screws clockwise until they are fasten. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 26 Figure 3-21 Install the hoop on the pole Step 4 Install the camera bracket on the installation plate. Figure 3-22 Use the screws to fix camera Step 5 Install the camera on the bracket. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 27: Installation Of Ipc6131-Wd-A & 6123-Wdl-A Box Camera

    ----End 3.4 Installation of IPC6131-WD-A & 6123-WDL-A Box Camera 3.4.1 Overview The overview of the IPC6131-WD-A network box camera is shown below. Figure 3-24 Overview (1) The overview of the components and the interface are shown below: Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright ©...
  • Page 28 Figure 3-26 Overview (3) Table 3-4 Description of Box Camera Description ¼-20 UNC Screw Hole Power Indicator Auto-iris Interface LAN(PoE) Power Outlet(AC24V±10% or DC12V±10%) Reset Micro SD Card Slot Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 29 Press RESET before the camera is powering on and hold it for 10 seconds when powering-on to restore the default settings. l The type of auto-iris interface is shown as below figure: Figure 3-27 Auto-iris Interface Table 3-5 Pins DC-drive Damp- Damp+ Drive+ Drive- Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 30: Lens Installation

    Step 3 To take out the SD card, press the card again and it will be ejected. ----End 3.4.4 Pendant Installation Step 1 Install the ceiling mount to the ceiling with the supplied expansion screws. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 31 Step 5 Adjust the surveillance angle. 1. Loosen the pan nut to adjust the pan angle [0°-360°]. 2. Loosen the knob on the ceiling mount to adjust the tilt angle [0°-90]. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 32 Step 7 Insert the SD card to the SD card slot to get it installed. Step 8 Push the inserted SD card slightly to get it sprung by its built-in springing to remove it. Figure 3-31 Install the SD Card ----End Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 33: Wall Mounting

    Step 2 Fix the bracket on the wall. Figure 3-33 Fix bracket Step 3 Fix the camera on the swing mount by the provided screws and then fix the swing mount on the bracket. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 34 (F-N) lever until you get the satisfied image. If you want to change the surveillance target area, you can loosen the screw on the swing mount and then turn the camera to focus on the desired area. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 35: Wall Mounting With Housing

    You can also press the ABF button on the back panel to enable auto-focus function. ----End 3.4.6 Wall Mounting with Housing Step 1 Fix the camera on the baseboard. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 36 Figure 3-38 Put the camera into the housing Step 3 Connect the cables to the camera and route the cables to the cable outlet. Step 4 Cover the cover of the housing. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 37 Figure 3-40 Install the bracket Step 6 Install the camera housing on the bracket with screws. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 38: Pole Mounting

    Figure 3-42 Adjust surveillance angel ----End 3.4.7 Pole Mounting NOTE the pole must be able to withstand 3 times the weight of the camera, bracket and shield. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 39 Step 2 Route the hoop through holes of the pole installation plate. Figure 3-44 Route the hoop through the plate Step 3 Install the hoop on the pole and rotate screws clockwise until they are fasten. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 40 User Guide 3 Camera Installation Figure 3-45 Install the hoop Step 4 Install the camera bracket on the installation plate. Figure 3-46 Install the bracket on the plate Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 41: Installation Of Ipc6332-Ir Dome Camera

    Figure 3-47 Install the camera on the bracket Step 6 Adjust the surveillance angel. Figure 3-48 Adjust the surveillance angel ----End 3.5 Installation of IPC6332-IR Dome Camera Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 42: Overview

    Table 3-6 Description of IPC6332-IR Dome Camera Description Front Cover Dome Drive Micro SD Card Slot Network Cable Lens IR LED Power Cable(DC12V±10%) Audio/Alarm Cables Serial Port Interface Hex Screw Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 43: Ceiling Mounting

    Step 1 Drill the screw holes and the cable hole in the ceiling according to the supplied drill template. Figure 3-50 Drill Template Step 2 Loosen the set screw on the front cover to disassemble the camera with the supplied Allen key. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 44 Step 4 Fix the dome drive with the supplied screws. Figure 3-52 Fix the Dome Camera Step 5 Connect the power cable, network cable, and the audio/alarm cables. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 45 Step 9 Tighten the hex screw to fix the well-adjusted surveillance angle. Step 10 Align the front cover to the dome drive and tighten the set screws on the front cover. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 46: Pendant Mounting

    Step1, and connect the corresponding cables. Step 2 Fix the adapter plate to the ceiling bracket with the supplied PM4X8 screws. Figure 3-56 Fix the Adapter Plate Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 47 Step 4 Align the front cover to the dome drive and tighten the set screws on the front cover to complete the installation. Figure 3-58 Install the Front Cover Step 5 Tear off the protection film softly to complete the installation. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 48: Wall Bracket Mounting

    The matched ceiling bracket model is IPC6332-MIR, and you need to purchases it separately if wall bracket mounting is adopted. Figure 3-59 Install Wall Bracket Step 2 Fix the adapter plate to the wall bracket. Figure 3-60 Fix the Adapter Plate Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 49: Installation Of Ipc6331-Ir & 6311-Ir Dome Camera

    Do not tear off the protection film until the installation is completed. l Do not touch the inside face of the bubble with your hands. ----End 3.6 Installation of IPC6331-IR & 6311-IR Dome Camera Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 50: Overview

    The overview of IPC6311-IR dome camera is shown below Figure 3-63 Overview Table 3-7 Description of IPC6311-IR Dome Camera Description Bubble Black Liner Lens Mounting Base Reset Auxiliary Video Output Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 51: Ceiling Mounting

    Step 1 Loosen the three screws on the edge of the bubble with the screw driver. Step 2 Open the bubble and remove the inner black liner. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 52 Skip this step if you want to route the cables on the surface of the ceiling. Step 6 Attach the camera to the ceiling by aligning the holes of the back box with the holes on the ceiling. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 53: Ceiling Mounting With Gang Box

    Step 1 Disassemble the camera. Step 2 Install the gang box in the ceiling. Step 3 Attach the mounting base to the gang box with two screws. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 54 Step 7 Connect the video output connector to the monitor. Connect the power connector to the power supply. Step 8 Adjust the image and focus. Figure 3-69 Secure Camera Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 55: Wall Mounting And Pendant Mounting

    Here we only take on of the brackets as an example. Step 1 Disassemble camera. Step 2 Install the wall mount and mounting adapter. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 56 IPC6131-WD-A&6123-WDL-A&6232-IR&6212- IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR User Guide 3 Camera Installation Figure 3-71 Install the Mounting Base (Bracket) Figure 3-72 Install the Mounting Base (Pendant) Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 57 Step 10 Install the inner black liner back to the camera. Step 11 Align the bubble with the camera. Step 12 Tighten the screws to secure the bubble with the camera. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 58: In-Ceiling Mounting

    Figure 3-74 Secure the Black Liner and the Bubble ----End 3.6.5 In-Ceiling Mounting Step 1 Install the SD card if needed. Step 2 Drill the installation hole on the ceiling according to the template. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 59 Step 3 Fix the adaptor of the camera on the in-ceiling mounting bracket. Figure 3-76 Fix the adaptor and the bracket Step 4 Fix the camera on the adaptor. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 60 Step 5 Install the black liner and the bubble of the camera. Figure 3-78 Install the black liner and the bubble Step 6 Put the camera with the in-ceiling bracket in the hole of the ceiling. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 61: Installing Water-Resistant Cap

    Step 1 Cut the crystal head of a network cable. Step 2 Route the cable to the secure hook, rubber ring, and the cap. Step 3 Tuck the rubber ring into the cap. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 62 Step 6 Connect the network cable and put the water resistance cap on the network interface of the camera side. Fasten the secure hook. Figure 3-81 Install the Water-resistant Cap ----End Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 63: System Requirement

    RAM: 1 GB or higher Display: 1024 x 768 pixels or higher Web Browser: Internet Explorer 7.0, Internet Explorer 8.0, Internet Explorer 9.0, Apple Safari, Mozilla Firefox, and Google Chrome. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 64: Network Connection And Setup

    Directly connect an IPC to the computer through a network cable. Figure 5-1 Connecting directly through a network cable (LAN) Connect an IPC to the computer through a switch or router. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 65: Connecting An Ipc Over The Internet

    Step 4 Set port mapping, such as 80, 8000, 8200, and 554 ports. The procedure for port mapping varies with routers. Seek help from the router manufacturer for port mapping. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 66: Dynamic Ip Connection

    Connecting an IPC through a Modem Network camera supports PPPoE auto dial-up. An IPC automatically obtains a public IP address by ADSL dial-up after connecting to a modem. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 67 > Network >DDNS, and enable the DDNS, and then select the DDNS type. For details, see Figure 8-9 8.3.4 Configuring DDNS Settings. Step 3 Visit the IPC with the obtained domain name. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 68 Step 5 Select IP Server as the DDNS type. Step 6 Enter the static IP address of the IP server in the Server IP box. Step 7 Click Save. ----End Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 69: Web Accessing

    Google Chrome are supported for live view. 6.2 Login Before you login the IPC management web page via Internet Explorer, set the security level of the web browser to Low as follows: Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 70 You are highly recommended to change the initial password right after the first login to avoid safety problem. l If you enter an incorrect password three consecutive times, your account gets locked. You must wait for five minutes to enter the login information. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 71 You need to add on the plug-in to login, as shown in Figure 6-3. Click Please click here to download and install the plug-in. Close the browser when installing the plug-in, and install the plug-in as prompted. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 72: Logout

    ----End 6.3 Logout On the Web page of the camera, click Logout button on the upper right corner, and click OK to confirm logout. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 73: Live View

    The Live View page is displayed after you login successfully. On this page, you can get the live view, capture images, perform PTZ control, set or call presets, and configure live video parameters, etc. Figure 7-1 Live View page Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 74 Figure 7-2 Live View Table 7-2 Icons Description Icon Description Start or stop live view. Control or mute the volume. Enable or disable two-way audio. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 75: Recording And Capturing Pictures Manually

    When an image is captured, the following message box will pop up at the lower left corner. Figure 7-3 Capture succeeded Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 76: Ptz Control

    Direction buttons are invalid for cameras that support lens movement only. Figure 7-5 PTZ Control Panel Click the zoom, iris, or focus buttons to realize lens control. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 77: Setting /Calling A Preset

    Pan the camera to the right or left. l Tilt the camera up or down. l Zoom in or out. l Refocus the lens. Step 3 Click to save the preset. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 78: Configuring Live View Parameters

    PTZ function or an external pan/tilt unit has been installed). Preset Setting/Calling Set and call the preset for the camera (if supports PTZ function or an external pan/tilt unit has been installed). Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 79: Network Camera Configuration

    – TCP: Ensures complete delivery of streaming data and better video quality, yet the real- time transmission will be affected. – UDP: Provides real-time audio and video streams. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 80: Configuring Time Settings

    You can follow the instructions in this section to configure the time synchronization and DST settings. Step 1 Enter the Time Settings interface: Configuration > Basic Configuration >System > Time Settings. Or Configuration > Advanced Configuration >System > Time Settings. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 81 NTP server for time synchronization. l Synchronizing Time Synchronization Manually Enable the Manual Time Sync function and then click to set the system time from the pop-up calendar. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 82: Configuring Network Settings

    IP version should be configured. Step 1 Enter TCP/IP Settings interface: Configuration > Basic Configuration >Network > TCP/ IP. Or Configuration > Advanced Configuration >Network > TCP/IP. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 83 IPC6311-IR does not support Video buffering. Step 4 Click to save the above settings. NOTE It asks for a reboot for the settings to take effect. ----End Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 84: Configuring Port Settings

    It asks for a reboot for the settings to take effect. ----End 8.3.3 Configuring PPPoE Settings Step 1 Enter the PPPoE Settings interface: Configuration >Advanced Configuration >Network > PPPoE. Figure 8-8 PPPoE Settings Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 85: Configuring Ddns Settings

    Step 1 Enter Server Address of DynDNS (e.g. members.dyndns.org). Step 2 In the Domain text field, enter the domain name obtained from the DynDNS website. Step 3 Enter the Port of DynDNS server. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 86: Configuring Snmp Settings

    Before you start, please download the SNMP software and manage to receive the camera information via SNMP port. By setting the Trap Address, the camera can send the alarm event and exception messages to the surveillance center. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 87 The settings of the SNMP software should be the same as the settings you configure here. Step 4 Click to save and finish the settings. NOTE It asks for a reboot for the settings to take effect. ----End Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 88: Configuring 802.1X Settings

    QoS (Quality of Service) can help solve the network delay and network congestion by configuring the priority of data sending. Step 1 Enter the QoS Settings interface: Configuration >Advanced Configuration >Network > QoS. Figure 8-14 QoS Settings Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 89: Configuring Ftp Settings

    Directory is selected, you can use the Camera Name or Camera No. as the name of the directory. l Upload type: To enable uploading the captured picture to the FTP server. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 90: Configuring Upnp™ Settings

    Configuration > Advanced Configuration > Network > TCP/IP) to set the IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway and the Preferred DNS Server. Step 2 Enter the Email Settings interface: Configuration > Advanced Configuration > Network > Email. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 91: Configure Nat Settings

    Receiver's Address: The email address of user to be notified. Step 4 Click to save the settings. ----End 8.3.11 Configure NAT Settings Step 1 Enter the NAT settings interface: Configuration >Advanced Configuration >Network > NAT Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 92: Configuring Video And Audio Settings

    Step 1 Enter the Video Settings interface: Configuration >Basic Configuration >Video / Audio > Video Or Configuration > Advanced Configuration >Video / Audio > Video. Figure 8-19 Configure Video Settings Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 93: Video Quality

    Set the I-Frame interval to 1~400. NOTE l The visit channels vary according to the different camera models. IPC6123-WDL-A, IPC6131-WD-A and IPC6231-WD-VRZ support up to 20 channels' visit, with a total bandwidth of 60M. IPC6232-IR, IPC6331-IR and IPC6332-MIR support up to 6 channels' visit, with a total bandwidth of 40M. IPC6212- IR and IPC6311-IR support up to 6 channels' visit, with a total bandwidth of 20M.
  • Page 94: Configuring Audio Settings

    ROI whereas the background information is less focused. Step 1 Enter the ROI settings interface: Configuration > Advanced Configuration >Video / Audio >ROI. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 95: Configuring Image Parameters

    The dynamic region refers to the ROI defined by intelligent analysis such as human face detection. You can choose the Image Quality Enhancing level for the ROI encoding. Step 5 Click to save the settings. ----End 8.5 Configuring Image Parameters Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 96: Configuring Display Settings

    – Saturation describes the colorfulness of the image color, which ranges from 1~100, and the default value is 50. – Sharpness describes the edge contrast of the image, which ranges from 1~ 100, and the default value is 50. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 97 – Capture Mode: It's the selectable video input mode to meet the different demands of field of view and resolution. Other: Some of the camera supports CVBS, SDI, or HDMI output. Please refer to the actual camera model for details. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 98: Configuring Osd Settings

    You can customize the camera name and time on the screen. NOTE The maximum on-screen display supports 320 pixels. Step 1 Enter the OSD Settings interface: Configuration > Advanced Configuration > Image > OSD Settings. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 99: Configuring Text Overlay Settings

    8.5.3 Configuring Text Overlay Settings You can customize the text overlay. Step 1 Enter the Text Overlay Settings interface: Configuration > Advanced Configuration > Image > Text Overlay. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 100: Configuring Privacy Mask

    Step 1 Enter the Privacy Mask Settings interface: Configuration > Advanced Configuration> Image > Privacy Mask. Step 2 Check the checkbox of Enable Privacy Mask to enable this function. Step 3 Click Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 101: Configuring Picture Overlay

    Picture overlay enables you to overlay a picture on the image. Step 1 Enter the Picture Overlay Settings interface: Configuration > Advanced Configuration> Image > Picture Overlay. Figure 8-28 Picture Overlay Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 102: Configuring And Handling Alarms

    NOTE Select Disable for rules if you don't want the detected objected displayed with the rectangles. Select disable from Configuration> Local Configuration> Live View Parameter s>Rules. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 103 Step 6 (Optional) Move the slider to set the sensitivity of the detection. ----End Task 2: Set the Arming Schedule for Motion Detection Figure 8-30 Arming Schedule Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 104 Check the checkbox to select the linkage method. Notify surveillance center, send email, upload to FTP, trigger channel and trigger alarm output are selectable. You can specify the linkage method when an event occurs. Figure 8-32 Linkage Method Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 105 Expert mode is mainly used to configure the sensitivity and proportion of object on area of each area for different day/night switch. Figure 8-33 Expert Mode of Motion Detection Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 106 Step 6 Set the arming schedule and linkage method as in the normal configuration mode. Step 7 Click to save the settings. ----End Day/Night Scheduled-Switch Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 107: Configuring Video Tampering Alarm

    Step 1 Enter the Tamper-proof Settings interface: Configuration > Advanced Configuration > Events > Video Tampering. Step 2 Check Enable Video Tampering checkbox to enable the video tampering detection. Figure 8-36 Video Tampering Alarm Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 108: Configuring External Alarm Input

    Step 4 Check the checkbox to select the linkage method taken for the alarm input. Refer to Task 3: Set the Alarm Actions for Motion Detection 8.6.1 Configuring Motion Detection. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 109: Configuring Alarm Output

    Task 2: Set the Arming Schedule for Motion Detection 8.6.1 Configuring Motion Detection Step 5 You can copy the settings to other alarm outputs. Step 6 Click to save the settings. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 110: Handling Exception

    Step 2 Check the checkbox to set the actions taken for the Exception alarm. Refer to Task 3: Set the Alarm Actions for Motion Detection 8.6.1 Configuring Motion Detection. Figure 8-39 Exception Settings Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 111: Configuring Face Detection

    The face detection is only supported by a certain series of camera modes. And it doesn't support any linkage method. ----End 8.6.7 Configuring Audio Exception Detection Audio exception detection detects the abnormal sounds, such as the silence detection, environment noise detection, and current noise detection. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 112: Configuring Intrusion Detection

    Step 2 Click Draw Area, and then draw a rectangle on the image as a defense region. NOTE When you draw the rectangle, all lines should connect end to end to each other. Up to four areas are supported. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 113 Step 2 Choose to trigger alarm actions as Notify Surveillance Center, Send Email, Upload to FTP and Trigger Channel or trigger the Alarm Output. Step 3 Click to save the settings. ----End Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 114: Configuring Defocus Detection

    Step 2 Click Edit to set the arming schedule. Step 3 Choose to trigger alarm actions as Notify Surveillance Center and Send Email, or trigger the Alarm Output. Step 4 Click to save the settings. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 115 IPC6131-WD-A&6123-WDL-A&6232-IR&6212- IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR User Guide 8 Network Camera Configuration Figure 8-44 Scene Change Detection ----End Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 116: Storage Settings

    Step 3 Select the mounting type. NFS and SMB/CIFS are selectable. And you can set the user name and password to guarantee the security if SMB/CIFS is selected. NOTE Please refer to the User Manual of NAS for creating the file path. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 117 Step 3 Define the quota for record and pictures. Input the quota percentage for picture and for record. Click and refresh the browser page to activate the settings. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 118: Configuring Recording Schedule

    SD card (if supported) or in the network disk. Step 1 Enter the Record Schedule Settings interface: Configuration > Advanced Configuration> Storage > Record Schedule. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 119 The Post-record time can be configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min or 10 min. NOTE The record parameter configurations vary depending on the camera model. Step 4 Click to edit the record schedule. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 120 Besides configuring the recording schedule, you have to set the Alarm Type and check the checkbox of Trigger Channel in the Linkage Method of Alarm Input Settings interface. For detailed information, please refer to 8.6.4 Configuring Alarm Output. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 121: Configuring Snapshot Settings

    You can configure the scheduled snapshot and event-triggered snapshot. The captured picture can be stored in the SD card (if supported) or the netHDD (For detailed information about Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 122: Basic Settings

    FTP parameters. Step 2 Check checkbox in Motion Detection Settings or Alarm Input interface. Please refer to Task 3: Set the Alarm Actions for Motion Detection 8.6.1 Configuring Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 123 9 Storage Settings Motion Detection, or Configuring External Alarm Input in 8.6.4 Configuring Alarm Output. Step 3 Check the Enable Event-triggered Snapshot checkbox. Figure 9-9 Snapshot Settings ----End Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 124: Playback

    HDD to format. Step 1 Click Playback on the menu bar to enter playback interface. Figure 10-1 Playback Interface Step 2 Select the date and click Search. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 125 Pause Start/Stop clipping video files Stop Audio on and adjust volume/Mute Speed down Download video files Speed up Download captured pictures Playback by frame Enable/Disable digital zoom Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 126 Figure 10-4 Set Playback Time Figure 10-5 Progress Bar The different colors of the video on the progress bar stand for the different video types. Figure 10-6 Video Types ----End Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 127: Log Searching

    Step 2 Set the log search conditions to specify the search, including the Major Type, Minor Type, Start Time and End Time. Step 3 Click Search to search log files. The matched log files will be displayed on the Log interface. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 128 Step 4 To export the log files, click to save the log files in your computer or external storage device. ----End Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 129: Others

    Step 3 In the Basic Permission field and Camera Configuration field, you can check or uncheck the permissions for the new user. Step 4 Click to finish the user addition. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 130: Configuring Rtsp Authentication

    12.2 Configuring RTSP Authentication You can specifically secure the stream data of live view. Step 1 Enter the RTSP Authentication interface: Configuration> Advanced Configuration> Security > RTSP Authentication. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 131: Ip Address Filter

    Step 3 Select the type of IP Address Filter in the drop-down list, Forbidden and Allowed are selectable. Step 4 Set the IP Address Filter list. ----End Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 132: Viewing Device Information

    ----End 12.4 Viewing Device Information Enter the Device Information interface: Configuration > Basic Configuration> System > Device Information or Configuration > Advanced Configuration> System > Device Information. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 133: Maintenance

    Step 1 Enter the Maintenance interface: Configuration > Basic Configuration> System > Maintenance or Configuration > Advanced Configuration> System > Maintenance. Step 2 Click to restore the default settings. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 134: Exporting /Importing Configuration File

    Step 1 Enter the Maintenance interface: Configuration > Basic Configuration> System > Maintenance or Configuration > Advanced Configuration> System > Maintenance. Step 2 Click to select the local upgrade file and then click to start remote upgrade. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 135: Settings

    If you want to connect the camera by the RS-232 port, the parameters of the RS-232 should be exactly the same with the parameters you configured here. Step 2 Click to save the settings. ----End Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 136: Settings

    The software service refers to enable the telnet or not. You are able to login the device by the telnet if the telnet function is enabled. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 137: Debug Maintenance

    The storage capacity of the flash is 2M. If the storage capacity limit is reached, the system overwrites the data. l The debug information can be used to identify the problem when error occurs. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 138: Troubleshooting

    Low illumination may cause the big noise point on the image. Overexposure may cause the color distortion. When the bitrate is set too low, the color cast may also take places. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 139: Power Supply And Interference

    6 square millimeters. How to prevent the camera from water For outdoor camera, you can use a shield and the cables should be enclosed too. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 140: Camera Network Problem

    For example, if the frame rate is configured as 21fps, the actual frame rate validated by the device should be 20fps.. Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 141: Specification

    Φ14, DC drive auto-iris Lens 2.8-12mm @ F1.4 angle of view: 91.2°-28.3° Operating Environment Power Supply 12 VDC ±10%/PoE (802.3af) Humidity 5% ~ 90% (non-condensing) Power Consumption Max.11.5W -Z/-H: Max.12.5W Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 142: Specification Of Ipc6232-Ir

    1s ~ 1/100,000s IR Range Approx.20 to 30 meters Lens Len Type Φ14, DC drive auto-iris Lens 4mm fixed focus Operating Environment Power Supply 12 VDC±10%/PoE (802.3af) Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 143: Specification Of Ipc6212-Ir

    Min. Illumination 0.01Lux @ (F1.2,AGC ON), 0 Lux with IR 0.014Lux @ (F1.4,AGC ON), 0 Lux with IR Digital Noise Reduction 52dB Shutter Speed 1s ~ 1/100,000s Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 144: Specification Of Ipc6131-Wd-A

    Table 14-4 Specification of IPC6131 Series Parameter IPC6131-WD-A 3 Megapixel CMOS WDR ICR Network Box Camera Camera Image Sensor 1/3" Progressive Scan CMOS Max. Resolution 2048 (H)×1536 (V) Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 145 2: CE EMC test criterion (EN55022,EN50130-4) Ingress Protection Level IP66 Vandal-proof Level IEC60068-2-75test, Eh, 50J; EN50102, IK10 Physical parameters Net Weight Weight with package Dimensions (mm) 69.8×58.0×145.0 Packaged Size (mm) 320×140×140 Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 146: Specification Of Ipc6123-Wdl-A

    Protection Criterion 1:Ports matched criterion (TVS±2000V) 2:CE EMC test criterion (EN55022, EN50130-4) Physical parameters Net Weight 650g Weight with package 830g Dimensions (mm) 69.8×58.0×145.0 Packaged Size (mm) 320×140×140 Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 147: Specification Of Ipc6332-Mir

    1: Ports matched criterion (TVS±2000V) 2: CE EMC test criterion (EN55022, EN50130-4) Protect Level IP66 Physical parameters Net Weight 350g Weight with package 600g Dimensions(mm) 99.3×96.7×52.8 Packaged Size (mm) 252×160×95 Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 148: Specification Of Ipc6331-Ir

    1: Ports matched criterion (TVS±2000V) 2: CE EMC test criterion (EN55022, EN50130-4) Protect Level IP66 Physical parameters Net Weight 800g Weight with package 1100g Dimensions (mm) Φ139.9×99.9 Packaged Size(mm) 140×140×154 Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 149: Specification Of Ipc6311-Ir

    Protection Criterion 1: Ports matched criterion (TVS±2000V) 2:CE EMC test criterion (EN55022,EN50130-4) Protect Level IP66 Physical parameters Net Weight 800g Weight with package 1100g Dimensions Φ139.9×99.9 (mm) Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 150 IPC6131-WD-A&6123-WDL-A&6232-IR&6212- IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR User Guide 14 Specification Packaged Size(mm) 140×140×154 Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 151: A Network Cable Connection

    Pin definitions of the straight network cable used for connecting dome and HUB, switch or other network devices: Figure A-1 Straight Network Cable Pin definitions of the crossover network cable used for directly connecting dome and PC: Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 152 IPC6131-WD-A&6123-WDL-A&6232-IR&6212- IR&6231-WD-VRZ&6332-MIR&6311-IR&6331-IR User Guide A Network Cable Connection Figure A-2 Crossover Network Cable Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 153: B Port Mapping

    Figure B-1 Selecting a WAN connection type Step 2 Set network parameters, including the IP address and subnet mask, as show in Figure B-2. Figure B-2 Setting network parameters Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 154 The ports of the IPC must be different from other ports. For example, if the web management port is 80, the service port must be changed to another value. ----End Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
  • Page 155: C Acronyms And Abbreviations

    Internet Protocol Internet Protocol Camera Image Signal Process Limited Power Source Network Attached Storage Network Time Protocol NTSC National Television Standards Committee Power over Ethernet Service Control Center Issue 02 (2014-12-25) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.

Table of Contents