Setup I-Learning Steps - Elsema Eclipse MCS Setup And Technical Information

Setup i-Learning Steps:

1. The i-Learning setup can always be interrupted with the stop button or by pressing the Master
Control knob.
2. Enter Menu 11 to start i-Learning or new control cards will automatically prompt you to do the
i-Learning.
3. Look at the LCD and follow the instructions displayed.
4. Buzzer will indicate learning was successful. If there was no buzzer check all electrical wiring
including the power supply then go back to step 1.
5. If you hear the buzzer after the i-Learn, the gate or door is ready for use.
www.elsema.com 11