Rwsc3, Cz-Rwrc3 - Panasonic S-160PE1R5B Technical Data & Service Manual

8-33. CZ-RWSC3, CZ-RWRC3
Installation Instructions
Part Names
(1) Light receiving section
Receives signals.
(2) Emergency operation button
Starts/Stops emergency operation.
OPERATION
TIMER
STANDBY
(3) Indication lamp
FILTER
Indicates operation status.
Read before installation
This receiver must be installed by the sales dealer or installer.
These instructions are all you need for most installation sites and
maintenance conditions. If you require help for a special problem,
contact our sales/service outlet or your certified dealer for
additional instructions.
Safety Precautions
We assume no responsibility for accidents or damages resulting
from methods other than those described in the installation
instructions or methods without using specified parts.
Malfunctions that occurred due to the unauthorised installation
methods are not covered by the product warranty.
● Read the installation instructions supplied with indoor units as
well.
● After the installation is complete, perform test operation to
confirm that no abnormality is present.
● When relocating or repairing this receiver, provide the
Installation Instructions to the servicing personnel.
● Do not clean inside the receiver by users. Engage authorised
dealer or specialist for cleaning.
This symbol refers to a hazard or unsafe
WARNING
practice which can result in severe
personal injury or death.
This symbol refers to a hazard or unsafe
CAUTION
practice which can result in personal injury
or product or property damage.
WARNING
 Turn off the circuit breaker of the units before
installation.
 This receiver shall be installed in accordance
with National Wiring Regulations.
 Connect and fix the specified cables for wiring
securely.
 Do not allow the connection to be exposed to
the external force of the cables.
 Select an installation location which is rigid and
strong enough to support or hold the receiver,
and select a location for easy maintenance.
 This receiver must not be modified or
disassembled under any circumstances.
Modified or disassembled receiver may cause
fire, electric shock or injury.
Dimensions
70
CAUTION
 Do not use the receiver at the following
locations.
• Location where flammable gases, etc. may leak
• Location where corrosive gases, etc. may leak
• Location with lots of water or oil droplets
(including machine oil)
• Location where droplets of organic solvents
spread
• Location where acidic or alkaline solutions or
special sprays are frequently used
 Do not wash with water.
 Do not operate with wet hands.
NOTICE
The English text is the original instructions.
Other languages are translation of the original
instructions.
1. Accessories
Supplied accessories
Wood screw
M4 × 15.5
(2)
CZ-RWSC3
CZ-RWRC3
8-29
Unit: mm
9.4
12
14
5.4
Installation
Clamper
Instructions
(1)
(1)
8