1. Simple Settings Function
•
This allows the filter lifetime, operating mode
priority change, central control address, and other
settings to be made for an individual or group-
control indoor unit to which the remote controller
used for simple settings is connected.
When simple settings mode is engaged, operation
stops at the individual or group-control indoor unit
to which the remote controller for simple settings is
connected.
<Procedure of CZ-RTC2>
â
Press and hold the
simultaneously for 4 seconds or longer.
1
ê
"
", unit No. "
group control), item code "
"
" are displayed blinking on the remote
controller LCD display (Fig. 1). At this time, the
2
indoor unit fan (or all indoor unit fans in the case of
group control) begins operating.
ô
If group control is in effect, press the
button and select the address (unit No.) of the
3
indoor unit to set. At this time, the fan at the indoor
unit begins operating.
* If unit No. "
will be made for all indoor units.
4
û
Press the temperature setting
buttons to select the item code to change.
á
Press the timer time
5
desired setting data.
* For item codes and setting data, see page 4-5.
é
Press the
and remains lit, and setting is completed.)
6
ó
Press the
controller display.
7
8
9
and
buttons
" (or "
" in the case of
", and settings data
" is displayed, the same setting
/
/
buttons to select the
button. (The display stops blinking
button to return to normal remote
[Remote Controller Functions Section]
7
1
6
4 - 2
3WAY VRF SYSTEM
Remote Controller Functions
2
CZ-RTC2
5
Fig. 1
3
4