Set Output Parameters; Adjust Screen Brightness - NovaStar MX Series User Manual

Figure 6-6 Internal source
When the device working mode is All-In-One Controller, the Select Input menu is not displayed.
Select a static picture or a motion picture.
When the relevant parameters of the image are displayed, set the parameters according to your actual needs;
otherwise, please skip this step.
Press the BACK button to go back to the upper-level menu and select Resolution.
Set Mode to Custom or Standard, and then set the resolution, frame rate and bit depth.
Figure 6-7 Resolution parameters

Custom: Set the resolution manually.

Standard: Select the desired resolution from the drop-down options.
After the settings are done, click Apply.

6.4 Set Output Parameters

6.4.1 Adjust Screen Brightness

Adjust and save the screen brightness.
On the main menu screen, select Screen Brightness and press the knob to let the brightness value become editable.
Figure 6-8 Screen brightness (the Send-Only Controller mode as example)
Rotate the knob to adjust the brightness to the target value, and then press the knob to confirm.
Choose Screen Configuration > Save to RV Card.
www.novastar.tech
MX30 LED Display Controller User Manual
16