Importing The Portal Configuration Into An Mbnet Via Usb - MB Connect Line mbNET Series Manual

Importing the portal configuration into an mbNET via USB

26.
If you have created the mbNET device configuration in the
configuration directly into the mbNET via the USB interface. The device automatically detects the portal configuration
stored on a connected USB stick. Press the Dial Out button to start the reading.
Requirement:
You have configured the mbNET in the
(mbconnect24.mbn / mbconnect24.mbnx) to a USB flash drive using the "Download to PC" mode.
ADVICE: The downloaded "mbconnect24.mbn/-.mbnx" configuration file may not be renamed and must
be saved in the top-level directory (root) of the USB drive. The USB drive must have the file format FAT /
FAT32.
Informationen about mbCONNECT24

our Internet pages at

or in the mbCONNECT24
Execution:
When the mbNET is ready for operation (LED Pwr + Rdy light up), plug the USB stick into the device's USB port.

As soon as the device has recognized the configu-
ration file, LEDs Fc1 + Fc2 start to flash synchro-
nously.

Now push and hold down the Dial Out button
until LED Fc3 flashes

Now release the Dial Out button
The settings from mbCONNECT24
copied to the mbNET and the device reboots.
If the mbNET is able to connect to the Internet (e.g. net-
work, telephone cable, SIM card, antennae installed), the
device will subsequently log in to your account. This is in-
dicated by the flashing LED Con.
ADVICE: If the firmware and an
always recognized by the mbNET (Fc1 + Fc3 flashing) first.
If you do not press the Dial Out button within 10 seconds, the mbNET will change to the portal configura-
tion (Fc1 + Fc2 flashing). If you do not react within 10 seconds, the device returns to normal mode.
mbCONNECT24
can be found at
https://www.mbconnectline.com
online help
.
❷
❸ .
are now automatically
❹ .
mbCONNECT24 portal configuration are located on the USB stick, the firmware is
mbCONNECT24 service portal, you can import this portal
portal and saved the configuration file
❶
❶
❷
❸
❹
Page 227 of 237
Version: 5.1.6 – June 4
th
, 2018