Table of Contents
Advertisement
System - USB
You can connect a USB device (flash or external drive) to the industrial router's USB port.
The USB storage medium can be accessed via SFTP.
To set up the USB port, select
the top. This will display the screen shown below.
USB Access from Network
Enable
Check this box if you like the mbNET to mount the USB device.
SFTP User
Displays the SFTP user ("ftp").
SFTP Password Set an SFTP password (the default is "ftp").
SFTP Password
Repeat the password.
Confirmation
To access the USB storage medium via SFTP, specify the IP address of the mbNET as the server, with the
sftp:// ... preceded as example: sftp://192.168.0.100
USB devices
Gray LED = USB not connected
Green LED = USB connected
ADVICE: Please note that the connected storage medium must be formatted FAT / FAT32.
With a different file system, such as NTFS can cause problems.
Page 110 of 237
Version: 5.1.6 – June 4
th
, 2019
System
on the navigation bar on the left and
USB
on the navigation bar at
Advertisement
Table of Contents
Need help?
Do you have a question about the mbNET Series and is the answer not in the manual?