Releas Notes - MB Connect Line mbNET Series Manual

Releas notes:

Version Date
V 5.0 01.10.2017
Comment
Previous version: V 3.3.5 DR 05 (23.03.2017)
Changes:
Chapter 11.1.4 Cloudserver
Here, for the purpose of hardening the system, the verification via certificates was additionally added.
Chapter 12.4 System > Settings > Time Settings
The following functions have been added:

„NTP Server Interval" and

„NTP Server Defaulttime"
Chapter 12.4 System > Settings > ...
The "System Services" area has been added here and the functions (security features)

„Disable Network Configuration (Conftool)" and

„Enable Manufacturer System Access".
Chapter 12.5 System > WEB > HTTP or HTTPS Access from Network
A selection field (http or https) has been added here.
Chapter 12.5 System > WEB > ...
Here, as an additional security feature, the "Services" area has been added, including the functions

„Disable complete Web-GUI (only recoverable with Factory Reset!)"

"Disable Factory Webservice "

"Disable Communication Webservice (SMS/Email) "
Chapter 16.3 System > USB
Changing the access function (access to USB only via SFTP).
Chapter 18.1.1 RS232/485 serial interfaces and 18.1.2 MPI/PROFIBUS interface
For additional hardening of the system, the function "Disable Service" has been added.
Chapter 19.1 Firewall General
Fundamental revision of the firewall.
Chapter 19.2 WAN > LAN
The "WAN Interface" selection field has been extended and a "LAN Interface" selection field for the target interface has been
added.
You can now enter ranges or enumerations in the fields IP and Port.
Chapter 19.3 LAN > WAN
Here, a selection field "LAN Interface" has been added and the existing selection field "WAN Interface" has been extended.
You can now enter ranges or enumerations in the fields IP and Port.
Chapter 19.4 Forwarding
Change the interface target for forwarded packets from a checkbox to a selection field.
You can now enter ranges or enumerations in the fields IP and Port.
Chapter 19.5 NAT
The menu has been extended by the "SimpleNAT" function.
Chapter 22.3 Digital outputs
Here the selection field "Function" was expanded by the option
"On by any User -Cloudserver-connection".
Added / inserted:
Chapter 25 Firmware update directly via USB
Chapter 26 Importing the portal configuration into an mbNET via USB
Page 9 of 237
Version: 5.1.6 – June 4
th
, 2018