Table of Contents
Advertisement
Select
Network
>
DynDNS
MB connect line DynDNS Service
Label
This option enables MB Connect Line's automatic DynDNS service.
The name structure is fixed in this case, and can only be freely defined on one host:
Name: Serialnumber.Hostname.mymbnet.biz
The serial number is fixed and the host name can be anything you choose.
Enable system
Example:
dynamic DNS
Device name: mbNET834
Serial number: 123456789
= Name on Internet: "123456789.mbNET834.mymbnet.biz"
The name will be globally available approx. 1-2 minutes after Internet dial-in.
Public DynDNS Service
Label
If you are registered with a DynDNS provider that you wish the industrial router to use, check
this box by clicking on it. The next time the industrial router dials into the Internet and re-
Enable
ceives a current IP address from the ISP, it will announce this address to the DynDNS ser-
vice.
Using the drop-down field, select the name of the provider with whom you are registered, e.g.
Provider
DynDNS.
User
Enter the user name that you used to register for the DynDNS service.
Password
Enter the password that you used to register for the DynDNS service.
Host Name
Enter the name that you assigned to the industrial router for the DynDNS service.
This field is for whenever the industrial router name changes, e.g. after a new Internet dial-in.
Interval[s]
Enter the time interval after which the industrial router will inform the DynDNS provider of the
new IP address.
Page 136 of 237
Version: 5.1.6 – June 4
th
, 2019
Description
Description
Advertisement
Table of Contents
