Table of Contents
Advertisement
Network Settings (no authentication or static key)
20.3.2.1.2
Label
Local IP address
Peer IP address
NAT-Traversal
With authentication without certificates, only one IP channel (local IP address and peer IP address) can be specified
per connection entry.
With manual configuration of the VPN client, the setting "Local IP address" and "Peer IP
address" must be reversed accordingly on the client.
Network Settings
Enter the IP address of the local VPN tunnel end point here, e.g. 10.1.0.5
Enter the IP address of the peer VPN tunnel end point here, e.g. 10.1.0.6
All packets coming into the LAN receive the sender IP address of the mbNET.
Although this means that it is then no longer possible to distinguish between send-
ers in the LAN, the LAN subscribers do NOT have to have the mbNET entered as
a gateway.
Description
Page 175 of 237
Version: 5.1.6 – June 4
th
, 2018
Advertisement
Table of Contents
