Menu Settings SIM
First, we need to specify a primary SIM card, which will always be verified or used first. The sec-
ondary SIM card is always the non-primary one.
Switching is based on two (selectable) criteria:
The SIM card fails to initialize, or to register on the cellphone network
Roaming is detected on the SIM
Label
SIM Pin
( only GSM )
Provider
( only GSM )
Providername
( only GSM )
Authentication via PAP
Authentication via CHAP
Timeout Dialout in [s]
Select primary SIM card
Page 122 of 237
Version: 5.1.6 – June 4
th
, 2019
Outgoing SIM 1 / 2
You can enter the PIN for the SIM card here if necessary.
Note: The device is also working, if the SIM card is not protected by a PIN.
You can select your mobile broadband provider here. If it does not appear, select
"Other"
If your provider was not shown, you can also manually enter the APN (Access Point
Name) here. You can obtain details of the APN from your mobile broadband provider
or from our website at
http://www.mbconnectline.de/gsm/grps/mobilfunk.html
Authentication protocol that transfers your login credentials
(Password Authentication Protocol). However, we recommend using the more secure
CHAP variant alongside this, as PAP sends your credentials unencrypted.
Authentication protocol that transfers your login credentials securely
(Challenge Handshake Protocol)
Enter a time in seconds (for example 300 (=5 minutes)), after dialing should be discon-
tinued.
Settings SIM
Choose the primary SIM Card (SIM 1 or SIM 2)
Description
Need help?
Do you have a question about the mbNET Series and is the answer not in the manual?