Vpn - Pptp; Server Settings - MB Connect Line mbNET Series Manual

VPN - PPTP

Server settings

Label
Enable
Autoconfig
Encryption
Authentication via
PAP
Authentication via
CHAP
Authentication via
MS-CHAP
Authentication via
MS-CHAP V2
Page 170 of 237
Version: 5.1.6 – June 4
th
, 2019
Server Configuration
Check this box by clicking it if the industrial router is to be enabled as a VPN server.
The local address of the mbNET will be used if you select "yes" here.
Encryption Configuration
Select the encryption method here via the
drop-down field:
None: No encryption
MPPE V2 40:40-bit encryption
MPPE V2 128: 128-bit encryption
MPPE V2 All: All encryption methods
Authentication Configuration
Select the authentication method here.
The client keeps sending the username/password combination to the host until it ac-
cepts or rejects authentication of the client.
Select the authentication method here.
This authentication method is controlled by the host. When a client dials in, it is
prompted by the host to authenticate itself. The client sends username/password using
MD5 encryption. The authentication is accepted if the user data sent matches the data
on the host. If not, it is rejected. If the authentication is accepted, the user data is peri-
odically checked during the connection.
Proprietary authentication protocol developed by Microsoft.
Proprietary authentication protocol developed by Microsoft.
Description