Table of Contents
Advertisement
Chapter 2 Preparations
1.11.4 Installing N8103-162 extra battery (for N8103-160)
This section describes the procedure of installing an extra battery for RAID controller.
1.
See Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
See Chapter 2 (1.6 Removing the Top Cover) to remove the top cover.
3.
Remove the RAID controller.
While matching the marking, connect the
battery control cable that comes with extra
battery to RAID controller.
4.
Remove one screw securing the riser card.
Hold the both sides of the card and lift it
straight off the server.
5.
Remove one screw from the riser card and
remove the blank cover of PCI slot which you
install the RAID controller.
6.
Attach the RAID Controller to the riser card.
7.
Insert the riser card into the slot of the
motherboard and fix the riser card with one
screw which you removed in step 4.
Position the terminal part of the riser card in
the slot of the motherboard and then securely
insert it.
PCI 1A slot
Express5800/R110f-1E User's Guide
1. Installing Internal Optional Devices
Black marking
PCI 1B slot
77
Advertisement
Table of Contents
