Table of Contents
Advertisement
RTLA30 scale and FASTRACK carrier installation drawing
‡
1 min (gap)
0.75 ±1
18 ±0.1
Scale end cover
(Pair A-9589-0058)
Ra 3.2
*
Assumes 1 mm gap between scale and end covers and minimum 2 mm gap between FASTRACK and end covers. Dimensions correct for single section of FASTRACK. Additional FASTRACK sections will require a minimum 2 mm gap
between each section. NOTE: Minimum recommended FASTRACK length = 100 mm. All dimensions applicable when using side cable outlet version.
‡
†
Only required for sectional installations.
For thermal expansion.
RESOLUTE FS with BiSS
Safety encoder system installation guide and safety manual
®
2 min - 10 max (gap)
RTLA30 scale
(A-9764-xxxx)
Detail A
Spot of Loctite
(2 positions) to secure
axis datum position
Optical centreline
(with adhesive datum clamp)
Overall length (L + 12)
Scale length (L)
Measuring length ML = (L − 10)
FASTRACK length (L − 28) *
0.5
F
0.1 / 100
F = axis of motion
FASTRACK
(A-9704-xxxx)
435
®
™
B
A
Detail B
DO NOT CUT FASTRACK
over shaded area
2 min
35 max
†
Original instructions
Dimensions and tolerances in mm
5
18
0.05
F
F = axis of motion
25
Advertisement
Table of Contents
