Product Compliance - Renishaw RESOLUTE FS with BiSS Series Installation Manual And Safety Manual

Product compliance

This document is an installation guide and safety manual, which details the actions required for the safe
integration of the RESOLUTE FS (Functional Safety) with BiSS
by the SA or SL prefix in the part number, into a functionally safe system; this will be referred to as
RESOLUTE FS with BiSS Safety system in the below document.
SIL2
FUNCTIONAL
SAFETY
PLd
The RESOLUTE FS with BiSS Safety system as defined below is suitable for use in a Category 3
performance level d (PLd) application in compliance with ISO 13849-1 and in a safety integrity level 2 (SIL2)
application in compliance with IEC 61508-1 and IEC 61800-5-2 when installed and operated in accordance
with the instructions defined.
Failure to follow the correct use instructions and heed the limitations may result in SIL2 and/or PLd
not being achieved and will invalidate the Functional Safety certification.
A copy of the RESOLUTE FS with BiSS Safety certificate is available from our website at
www.renishaw.com/productcompliance.
C
Renishaw plc declares that RESOLUTE FS with BiSS Safety system complies with the applicable standards
and regulations. A copy of the EU declaration of conformity is available from our website at
www.renishaw.com/productcompliance. For further details of FS compliance
see 'Certification' on page 4.
FCC compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The user is cautioned that any changes or modifications not expressly approved by Renishaw plc or
authorised representative could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
NOTE: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be
used with the unit to ensure compliance.
Further information
Further information relating to the RESOLUTE FS with BiSS Safety encoder range can be found at
www.renishaw.com/safety-encoders
and is also available from your local Renishaw representative.
This document may not be copied or reproduced in whole or in part, or transferred to any other
media or language, by any means without the written prior permission of Renishaw.
The publication of material within this document does not imply freedom from the
patent rights of Renishaw plc.
RESOLUTE FS with BiSS Safety encoder system installation guide and safety manual
®
Safety encoder system, as designated
®
Patents
Features of Renishaw's encoder systems and similar products are the subjects of the following
patents and patent applications:
CN1260551 DE10296644
CN102197282 EP2350570
CN102388295 EP2417423
CN102460077 EP2438402
US20120072169 US6465773
CN1293983 DE10297440
CN1314511 EP1469969
US8987633 JP4423196
Disclaimer
RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT
IS CORRECT AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS
REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY, HOWSOEVER ARISING, FOR ANY
INACCURACIES IN THIS DOCUMENT.
The packaging of our products contains the following materials and can be recycled.
Packaging Component Material
Outer box Cardboard
Polypropylene
Inserts Low Density Polyethylene Foam
Cardboard
Bags High Density Polyethylene Bag
Metallised Polyethylene
REACH regulation
Information required by Article 33(1) of Regulation (EC) No. 1907/2006 ('REACH') relating to products con-
taining substances of very high concern (SVHCs) is available at www.renishaw.com/REACH.
The use of this symbol on Renishaw products and/or accompanying documentation indicates that the
product should not be mixed with general household waste upon disposal. It is the responsibility of the end
user to dispose of this product at a designated collection point for waste electrical and electronic equipment
(WEEE) to enable reuse or recycling. Correct disposal of this product will help to save valuable resources
and prevent potential negative effects on the environment. For more information, please contact your local
waste disposal service or Renishaw distributor.
Original instructions
GB2395005 JP4008356
JP5480284 KR1630471
JP5659220 KR1701535
JP5755223 JP6074392
EP1094302 JP5442174
GB2397040 JP4813018
EP2390045 JP5002559
US7367128
ISO 11469 Recycling Guidance
Not applicable Recyclable
PP Recyclable
LDPE Recyclable
Not applicable Recyclable
HDPE Recyclable
PE Recyclable
US7499827
US8505210
US10132657
KR1851015
US6481115
US7723639
US8466943
1