Linear Resolute Readhead Installation Drawing With Rtla30 Scale And Fastrack Carrier - Renishaw RESOLUTE FS with BiSS Series Installation Manual And Safety Manual

Linear RESOLUTE readhead installation drawing with RTLA30 scale and FASTRACK carrier

Orientation of scale
determines count direction
Moving head
increases
count direction
Moving head
increases
count direction
16.5
6.4
17.2
7.8
0.75 ±1
*
Extent of mounting faces
†
UHV cable diameter 2.7 mm. Dynamic bend radius not applicable for UHV.
‡
Minimum thread engagement 5 mm (8 mm including counterbore). Tightening torque 0.5 to 0.7 Nm.
RESOLUTE FS with BiSS Safety encoder system installation guide and safety manual
®
(Yaw tol. ±0.5°)
18 ±0.1
NOTE: Reversing head orientation
has no effect on count direction.
R> 20 Dynamic bend radius
R> 10 Static bend radius
(Roll tol. ±0.5°)
0.05
Scale and optical centreline
0.31
6.5 min
36
18
†
12
3
Optical centreline
Set-up LED
Rideheight 0.6 ±0.15 from
FASTRACK top surface
14
10 typ *
2 mounting holes M3 through,
counterbored each side, 3 deep
6 typ*
A
(Pitch tol. ±0.5°)
0.31
Original instructions
Dimensions and tolerances in mm
Detail A
0.4
FASTRACK
thickness
‡
24