Rgsz20-S Scale Installation Drawing - Renishaw TONiC T100x RGSZ Installation Manual

RGSZ20-S scale installation drawing

START
30
13
P limit magnet
0.05 F
F = axis of motion
Nominal P limit trigger point (±3)
*Supplied with 2 x M2 x 4 Trifix screws.
NOTE: The reference mark selector and limit actuator locations are correct for the readhead orientation shown.
TONiC RGSZ installation guide
20
Reference mark selector
magnet
15 ±1
Optional bolted reference mark selector or limit magnets
Reference mark selector A-9653-0290
Q limit A-9653-0291
P limit A-9653-0292
Overall length (L+30)
Scale length (L)
Measuring length ML = (L-55)
ML = (L-40) when Q limit not used
Readhead optical detector position at extent of travel
Reference mark spacing 50
RGSZ20-S 6.05 ±0.1
RGSZ20-P 6.2 ±0.1
Optical centreline
(incremental and reference mark)
Ø2.2 *
3.7
35
(20 when Q limit not used)
0.5
F
0.2/100
F = axis of motion
Q limit magnet
Nominal Q limit trigger point (±3)
22
18
10
1.85
18.5 ±1
Dimensions and tolerances in mm
FINISH
End clamp
(Pair A-9523-4015)
Ra 3.2
4