Table of Contents
Advertisement
Certification
RESOLUTE FS with BiSS Safety encoder system
Funtional Safety Certificate No. FSC002
Under the terms of CSA SIRA Functional Safety Certificate SIRA CASS00023/01, for the management and
self-certification of functional safety activities up to SIL3/PLd:
Renishaw plc declares that the products listed by this installation guide meet the requirements of:
BS EN IEC 61508-1:2010, BS EN IEC 61508-2:2010 and BS EN IEC 61508-3:2010
BS EN 61800-5-2:2017 (IEC 61800-5-2:2016)
BS EN ISO 13849-1:2015 and BS EN ISO 13849-2:2012
when used as an element/subsystem in safety related systems performing safety functions requiring up to
and including:
SIL2 with HFT = 0 (1oo1)
Category 3, PLd.
RESOLUTE FS with BiSS
Safety encoder system installation guide and safety manual
®
SIL2
FUNCTIONAL
SAFETY
PLd
EC Declaration of conformity
Renishaw plc declares under its sole responsibility that the products identified below are in
conformity with all relevant Union legislation.
Product Name:
RESOLUTE FS with BiSS Safety encoder system
Description:
RESOLUTE optical encoder system, that is FS certified
Part number:
Readheads:
Valid from:
Serial number 2HPJ17
The products comply with EU directives
2014/30/EU
Electromagnetic compatibility (EMC)
2011/65/EU
On the restriction of the use of certain hazardous substances
in electrical and electronic equipment (recast)
and comply with the following technical standards
BS EN 12100:2010
Safety of machinery. General principles for design.
Risk assessment and risk reduction
BS EN 61010-1:2010
Safety requirements for electrical equipment for measurement,
control, and laboratory use
Part 1: General requirements
BS EN 61326-1:2013
Electrical equipment for measurement, control and laboratory use.
EMC requirements. General requirements
Immunity to Table 2 - Industrial electromagnetic environment
Emissions to Class A - Industrial electromagnetic environment
BS EN 62471:2008
Photobiological safety of lamps and lamp systems
BS EN IEC 63000:2018
Technical documentation for the assessment of electrical
and electronic products with respect to the restriction of
hazardous substances
The persons authorised to compile the technical file and issue the declaration of conformity are:
Steve Oakes, Director and General Manager, Encoder Products Division
Martin Curtis, Regulatory Compliance Manager, Encoder Products Division
Renishaw plc, New Mills, Wotton-Under-Edge, Gloucestershire, GL12 8JR, United Kingdom
Signed: M. Curtis
Dated: 21/02/2020
Place: Wotton-Under-Edge
Reference No. EUD 2018-017
Original instructions
Linear: SL28B*; SL36B*
Rotary: SA32B*
4
Advertisement
Table of Contents
