Connection With Printer Through Serial Interface - Fuji Electric POD UG221H-LE4 User Manual

Connection with Printer through Serial Interface

• To connect a printer through serial interface, connect the cable to a modular jack (MJ1).
• Refer to the specification sheet of the printer to be used for the connecting cable for serial
interface.
For information on MJ1 signals, refer to page 2-9.
• To connect a printer through the parallel interface, use a commercially available parallel-serial
converter.
When the serial connector of the converter is a D-sub 9-pin male connector, use our UG00C-T
connection cable.
Simple POD
SYSTEM
F1
F2
F3
F4
F5
POWER
Compatible Printer Models
Control code system:
• PR201
• ESC-P
• HP
Others:
• CBM292/293
• MR400
D-sub 25-pin-9-pin converter
UG00C-T
MJ
PC-PR201 series compatible with MS-DOS computer
ESC/P24-J84, ESC/P-J84, ESC/P super function compatible
with MS-DOS computer
PCL Level 3
CBM's line thermal printer (Screen hard copying is not
possible.)
Sato's barcode printer "MR400 series" (It is not possible to
print a screen hard copy, data sheet or sampling data.)
5. Modular Jack (MJ1)
Parallel port
Parallel-serial converter
2-11
Printer
2