Features - Fuji Electric POD UG221H-LE4 User Manual

1.

Features

The Simple POD inherits and heightens the features of the UG20 Series as described below.
1. Low-cost Standard Model
The Simple POD is a low-cost model adapted to provide the minimum necessary functions.
This compact model, just 44.0 mm thick with a simple interface, is ideal for cost reduction.
Two types with a 16-color display and an 8-step gradation white mode display are available. Only
analog switches are usable on the Simple POD.
2. One MJ Port Provided as Standard
Only one MJ port is provided in line with providing the minimum necessary functions.
The functions listed below can be used through MJ1.
- Card recorder
- Barcode reader
- UG00P-U2
- Multi-link 2
- Temperature control network/PLC2Way
- UG-Link
- Ladder transfer function
- Modbus slave communication
- Printer port (serial)
* When the simulator is used, MJ1 must be selected as [Editor Port]. This means that the
functions listed above cannot be used.
3. Brightness Adjustment with Macro Command
The brightness is adjustable with the macro command BRIGHT.
Use this adjustment function together with the contrast adjustment.
4. For UG221H-LR4 and SR4
UG221H-LR4 and SR4 contain a 128 kbyte SRAM.
It can be used for purposes including the built-in clock function, history data backup, and
nonvolatile memory $L.
* The Simple POD is not equipped with a printer port (parallel). When connecting to a printer, use
the serial port (MJ1).
1-1
1. Features
1