Fuji Electric POD UG221H-LE4 User Manual page 13

1-4
2. Models and Peripheral Equipment
* The devices below are not usable with the Simple POD.
Model
UG00P-TC
UG03(02)I-x
UG00C-C
UG00P(221P)-D4
UG00P(221P)-SR
UG00C-B (barcode reader connection cable) 3 m
Used for connection between the Simple POD and a barcode reader.
UG00C-H
(multi-link 2 master cable)
Used for Multi-Link 2 connection between the Simple POD master station and the Simple
POD slave station.
UG00C-P (temperature controller connection cable) 3 m
Used for connection between the Simple POD and a temperature controller or a PLC using
the PLC2Way function via RS-422 (4-wire connection).
UG30C-M (MJ-to-D-sub conversion cable) 0.3 m
Used for connection of the Simple POD via PLC2Way.
UGxxP-PS (protective sheet: clear type)
UGxxP-PT (protective sheet: anti-glare type)
This sheet protects the operation panel surface. (5 sheets/set)
UG30P-BT (battery for replacement)
Replacement lithium battery for the UG30 series.
Name
Terminal converter
Communication I/F unit
Printer cable
FROM cassette
SRAM cassette
3 m