Plc2Way - Fuji Electric POD UG221H-LE4 User Manual

7.

PLC2Way

• The "PLC2Way" function is an original network function where one Simple POD unit can be
connected to two PLCs. Even if the manufacturers of these PLCs are not the same, they can be
connected to one Simple POD unit.
• Connect one PLC to the CN1 connector, and the second PLC to the MJ port.
• With the PLC2Way function, it is possible to communicate with PLCs without special program in
the same way as 1 : 1 connection.
Two PLCs that are connected to the Simple POD are controlled at the same time, and memory
read/write operations are available with these two PLCs.
• Connection at the MJ port can be performed via RS-232C or RS-485 (2-wire).
With RS-232C, one PLC can be connected; with RS-485, a maximum of 31 PLCs can be
connected.
SYSTEM
Simple
F1
F2
POD F3
F4
F5
POWER
• Constant reading/sampling of PLC data connected to the MJ port
When read/write memory addresses are preset on the temperature control network/PLC2Way
table, background data reading is performed at regular intervals. It is also possible to save the
read data in the Simple POD internal buffer, SRAM or CF card.
• Data transfer between PLCs
The PLC memory data can be transferred to another PLC in blocks using a macro command.
• For more information, refer to the User's Manual <PLC Connection> (FEH380).
RS-232C
RS-422/RS-485
SYSTEM CN1
Simple
F1
F2
POD F3
F4
F5 MJ1
POWER
PLC
RS-232C
RS-422/RS-485
CN1
MJ1
PLC
PLC1 PLC2
7. PLC2Way
(MITSUBISHI)
PLC
RS-232C
(2-wire connection)
RS-422/RS-485
(Yokogawa)
(2-wire connection)
RS-422/RS-485
(n = 1 to 31)
PLCn
5-7
5