Check; Warning - Fuji Electric POD UG221H-LE4 User Manual

2.

Check

Error Message
Screen No. Error
Data has some error.
Error : XX (XX : XXX)
Check
Screen No. Error
POWER
Error Message
Communication Error
Check I/F driver
3.

Warning

An error may be displayed on the Main Menu screen during data transfer.
This is a warning message.
For the warning details and solutions, refer to the User's Manual <Function> (FEH376) and correct
screen data.
Contents
At the start of communications, the Simple POD regards the
There is no setting for the value in the read area "n + 2" as the screen number.
received screen. Check that the value in the read area "n + 2" is an existing
screen number on the PLC.
"Error : XX (XX : XXX)" indicates the edited screen and the
There is an error in the contents of the error.
created screen data. For the error details and solutions, refer to the User's Manual
<Function> (FEH376) and correct screen data.
SYSTEM
F1
F2
F3
F4
F5
Contents
Although a request to
send is given to the The I/F driver for simulator is transferred.
computer, no answer is If you do not use the simulator, uncheck [Use Simulator]
returned within the before transferring data.
specified time.
Warning message
1. Error Message
Solution
Communication Error
Check I/F driver
Check
POWER
Solution
POWER
7-3
SYSTEM
F1
F2
F3
F4
7
F5
SYSTEM
F1
F2
F3
F4
F5