Configuring Inputs And Outputs; Changing Parameters - Deif CGC 200 Installation And Commissioning Instructions

CGC 200 installation and commissioning Commissioning
instructions 4189340806 UK
You must be in List view to set favourite parameters and write individual parameters.

4.3.5 Configuring inputs and outputs

Digital inputs and outputs can be configured in either Tree or List view.
In Tree view, select the input or output you want to assign from the drop-down list.
In List view, double click the parameter line for the input or output you want to change. Select the input or
output you want from the drop-down list in the dialogue box.

4.3.6 Changing parameters

To change parameters, do the following:
DEIF A/S Page 26 of 32