Establishing An Online Connection Between The Pc And Converter (Going "Online") - Siemens SINAMICS G120 Operating Instructions Manual

Commissioning
4.5 Commissioning with STARTER
4.5.2

Establishing an online connection between the PC and converter (going "online")

Description
With the procedure described above, the project has been created and your inverter is
integrated into the project tree. However, there is no online connection.
● Click on
The left-hand column in the dialog box below contains the online data that has been saved,
while the right-hand column contains the offline data that has been saved.
● Click on "Load HW configuration to PG" to download the online data into your PC.
● To conclude your entry, choose "Close".
● The status display changes from the "Offline mode" with blue background into the "Online
64
("Connect to the target system"), in order to go online with the inverter.
Figure 4-10 Inverters found online (using the SINAMICS G120 with Control Unit CU240S DP as
example)
mode" with yellow background.
CU240S and CU240E Control Units, FW 3.2
Operating Instructions, 03/2009, A5E02440075B AA