Wiring Examples For The Factory Settings - Siemens SINAMICS G120 Operating Instructions Manual

Commissioning
4.4 Commissioning with factory settings
4.4.1

Wiring examples for the factory settings

Many applications function using the factory settings
To ensure that the factory setting can be used, you must wire the control terminals on your
inverter as shown in the following examples.
Default settings for the control terminals on the CU240E
Figure 4-1
52
CU240E terminal overview: wiring example for using the factory settings
CU240S and CU240E Control Units, FW 3.2
Operating Instructions, 03/2009, A5E02440075B AA