Commissioning - Siemens SINAMICS G120 Operating Instructions Manual

Commissioning

Alternative commissioning options
The functions of an inverter are activated and configured using parameters. Parameters can
either be accessed from the operator control/display instrument (operator panel) or using the
STARTER commissioning tool from the PC via the appropriate inverter interface.
Inverters can also be parameterized by saving the valid inverter parameter set on an MMC
memory card or on the Operator Panel and then transferring it to a different inverter with the
same configuration and function.
The commissioning scenarios listed below are described in the following sections:
● Commissioning, using the factory settings
● Commissioning using the STARTER commissioning tool
● Commissioning using the Operator Panel
● Data backup with the Operator Panel and MMC memory card
Users can access the inverter parameters via the following interfaces
CU240S and CU240E Control Units, FW 3.2
Operating Instructions, 03/2009, A5E02440075B AA
4
45