Siemens SINAMICS G120 Operating Instructions Manual page 144

Functions
5.10 Technological functions
Automatic restart characteristics
Table 5- 62 Overview of the automatic restart characteristics
P1210 ON command always active (continuously)
Fault F0003 due to
Power
failure
0 --*
1 Fault
acknowledgeme
nt
2 Fault
acknowledgeme
nt + restart
3 Fault
acknowledgeme
nt + restart
4 Fault
acknowledgeme
nt + restart
5 Fault
acknowledgeme
nt + restart
6 Fault
acknowledgeme
nt + restart
*) -- = no action
144
All other faults
Line supply Before
undervoltage power failure
--*
--* Fault
acknowledgeme
nt
--*
Fault Fault
acknowledgement acknowledgeme
+ restart nt + restart
Fault
acknowledgement
+ restart
--* Fault
acknowledgeme
nt + restart
Fault Fault
acknowledgement acknowledgeme
+ restart nt + restart
in
operation
--* --*
--*
--* --*
Fault
acknowledgeme
nt + restart
--* --*
--*
Fault
acknowledgeme
nt + restart
Operating Instructions, 03/2009, A5E02440075B AA
ON command in the de-energized
state
Inverter Inverter ready
signals a fault
Before power
Before power failure
failure
--*
Fault
acknowledgement
--* Restart
Fault
acknowledgement
+ restart
--*
Fault Restart
acknowledgement
+ restart
Fault Restart
acknowledgement
+ restart
CU240S and CU240E Control Units, FW 3.2
--*
--*
--*
--*