Pnp/Pci Configuration Setup - AXIOMTEK SBC84830 Series User Manual

SBC84830 Series All-In-One ECX Board User's Manual
** Reload Global Timer Events **
Global Timer (power management) events can prevent the system
from entering a power saving mode or can awaken the system from
such a mode.
Primary/Secondary IDE 0/1
Use this item to configure the IDE devices monitored by the system.
COM Port
Use this item to configure the COM ports monitored by the system.
PCI PIRQ[A-D]#
This item can be used to detect PCI device activities; if no activity,
the system will enter the sleep mode.

4.10 PnP/PCI Configuration Setup

This section describes the configuration of PCI (Personal Computer
Interconnect) bus system, which allows I/O devices to operate at
speeds close to the CPU speed while communicating with other
important components. This section covers very technical items that
only experienced users could change default settings.
Init Display First
This item allows you to decide whether PCI Slot or AGP to be the
first primary display card.
Reset Configuration Data
Normally, you leave this item Disabled. Select Enabled to reset
Extended System Configuration Data (ESCD) when you exit Setup
Award BIOS Utility
45