AXIOMTEK SBC84830 Series User Manual page 40

SBC84830 Series All-In-One ECX Board User's Manual
First/Second/Third Boot Device
These items let you select the 1
system will search for during its boot-up sequence. The wide range
of selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI, and
CDROM.
Boot Other Device
This item allows users to enable or disable the boot device not
listed in the First/Second/Third boot devices option above. The
default setting is "Enabled".
Boot Up NumLock Status
Set the the Num Lock status when the system is powered on.
The default value is "On".
Gate A20 Option
The default value is "Fast".
Normal
The A20 signal is controlled by keyboard controller
or chipset hardware.
Fast
Default: Fast. The A20 signal is controlled by Port
92 or chipset specific method.
Typematic Rate Setting
This item determines the typematic rate of the keyboard. The
default value is "Disabled".
Enable typematic rate and typematic delay
Enabled
programming
Disable typematic rate and typematic delay
Disabled programming. The system BIOS will use default value
of these 2 items, controlled by keyboard.
Typematic Rate (Chars/Sec)
This option refers to character numbers typed per second by the
keyboard. The default value is "6".
6
8
10
12
15
20
34
st nd rd
, 2 , and 3 devices that the
6 characters per second
8 characters per second
10 characters per second
12 characters per second
15 characters per second
20 characters per second
Award BIOS Utility