AXIOMTEK SBC84830 Series User Manual page 41

SBC84830 Series All-In-One ECX Board User's Manual
24
30
Typematic Delay (Msec)
This option defines how many milliseconds must elapse before a
held-down key begins generating repeat characters. The default
value is "250".
Security Option
This item allows you to limit access to the system and Setup, or
just to Setup. The default value is "Setup".
If a wrong password is entered at the prompt, the system
System
will not boot, the access to Setup will be denied, either.
If a wrong password is entered at the prompt, the system
Setup
will boot, but the access to Setup will be denied.
NOTE: To disable the security, select PASSWORD
SETTING at Main Menu and then you will be asked
to enter a password. Do not type anything, just
press <Enter> and it will disable the security. Once
the security is disabled, the system will boot and
you can enter Setup freely.
APIC Mode
Use this item to enable or disable APIC (Advanced Programmable
Interrupt Controller) mode that provides symmetric multi-processing
(SMP) for systems.
MPS Version Control For OS
This item specifies the version of the Multiprocessor Specification
(MPS). Version 1.4 has extended configuration tables to improve
support for multiple PCI bus configurations and provide future
expandability.
Small Logo <EPA> Show
Award BIOS Utility
24 characters per second
30 characters per second
-- End of Typematic Rate Table --
250 250 msec
500 500 msec
750 msec
750
1000 msec
1000
35