Danger Zones - Krone Swadro TC 680 Original Operating Instructions

Rotary rake
Hide thumbs Also See for Swadro TC 680:
Table of Contents

Advertisement

Safety
Pos: 16.9.27 /Überschriften/Überschriften 3/F-J/GGefahrenbereiche @ 187\mod_1380012427290_78.docx @ 1606906 @ 3 @ 1
3.4.9

Danger zones

Pos: 16.9.28 /BA/Sicherheit/1. Grundlegende SicherheitshinweiseGefahrenbereiche_Einleitung_fuer alle @ 453\mod_1463991292572_78.docx @ 3077571 @ @ 1
When the machine is switched on, a danger zone may be created around this machine.
To avoid getting into the danger zone of the machine, maintain at least the safety distance.
If the safety distance is not followed, people may be seriously injured or killed.
Do not switch on the drives and the engine until you are sure that no one has ignored the
safety distance.
If people ignore the safety distance, switch off the drives.
Stop the machine in the shunting operation and field mode.
Pos: 16.9.29 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Gefahrenbereiche rund um Wender, Schwader T2 @ 294\mod_1411639162229_78.docx @ 2313568 @ @ 1
If the danger zone is not observed, people may be seriously injured or killed.
Keep people away from the danger zone of the tractor and the machine.
Do not switch on the drives and engine until there is nobody in the danger zone.
The safety clearance is:
30 metres in front of the machine while in operation.
5 metres in front of the machine when at a standstill.
3 metres on either side of the machine.
5 metres behind the machine.
Before working in front of and behind the tractor and in the danger zone of the machine:
Shut down and safeguard the machine, see chapter Safety, "Shutting down and
safeguarding the machine". This also applies to brief inspection work. Many serious
accidents in front of and behind the tractor and the machine occur due to negligence and
running machines.
Consider the information in all relevant operating instructions.
The operating instructions for the tractor
The operating instructions for the machine
The operating instructions for the universal shaft
Pos: 16.9.30 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
16

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Swadro TC 680 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Swadro tc 760

Table of Contents