Mitsubishi 800 Series User Manual page 98

Display screen
l = l l m
Functions
This is the menu screen where the various utility functions are selected.
The brightness of the screen can be adjusted on this screen.
The screen message display (JapaneseIEnglish) can be selected on this screen,
Ish
Operation
(a) Basic operation
Directly touch the section where the function to be selected is displayed.
(b) Return to the monitor screen
Touching the returns to the monitor screen.
(c) Brightness adjustment
Touch
ml.
The brightness can be adjusted in 50 steps.
The brightness adjustment is the STN type only.
(d) Message display selection
Touch or
mI.
(m]
: English,
m i :
Japanese)
Point
If the OS has not been installed in the GOT, the items for system monitoring and special
If no memory cassette has been installed in the GOT, or if the OS has not been installed in
If the PC CPU connected to the GOT does not have a clock function, the clock setting is
module monitoring are displayed, but cannot be selected.
the GOT, the items for circuit monitoring are displayed, but cannot be selected.
displayed, but cannot be selected.
a
Error messages displayed in response to operations
Message Cause Corrective Action
Can't be selected
OS
has not been installed in
GOT
Install the
OS.
(When system monitor, special Memory card has not been in Install the memory cassette.
module monitor, circuit monitor,
or
PC CPU connected
to GOT
has no Replace the
PC CPU
with one that
clock setting is selected)
clock function has a clock function, or do not use
the clock function.
7 - 3