Mitsubishi 800 Series User Manual page 34

Calculator Link Connection (RS-422 Communicmtjoe)+l
, .
.
,
2.6.1 System configuration
When the GOT is connected to a calculator link module and a serial communications module
using a calculator link module connection cable, the following system configuration is used.
When connecting the calculator link module, a peripheral module designed for GPP functions
can be connected to the RS-422 connector of the PC CPU and debugging of sequence pro-
grams carried out while monitoring the GOT.
When connecting the calculator link module, the following are not possible: changes to the V or
Z data in CPU device tests in the circuit monitor functions and system monitor functions: moni-
toring of or changes to the set value during T/C monitoring, monitoring of the I/O module, and
monitoring of or changes to the special function module data using special screens.
A1 SI71 QC24
Serial communications
Calculator link
module expansion cable
module connection cable
AC30R4fAClOOR4/
A7GT-AC30R4
A7GT-AClOOR4
A7GT-AC300R4
v v
module
A8GT-RS4
Calculator link module
AJ71 UC24
A1 SI71 UC24-R4
AI71 C24-S8
*1. For information on the system configuration on the calculator link module side, please refer to
the user's manual for the calculator link module being used.
2 - 6