Mitsubishi 800 Series User Manual page 94

5 .
HamMng,.Component Equipment Modules
MELSEC GOT
I
I
5.6. Install= Printer Interface W ~ m a W 0 4 d r W r d a W l u k .
\
This section shows how to enter the settings for the printer interface module/extemal I/O interface
module installed in the GOT. For more detailed information on printer interface module/external
I/O interface module specifications, please refer to the A8GT-70PRF User's Manual and the A8GT-
70KBF User'sManual.
I
@DANGER
0 When installing a printer interface module/external l/O interface module in the GOT,
or
removing it from the GOT, switch all phases of the external power supply
off
to the
I
GOT d
I
Insert connectors A8GT-70PRF and A8GT-70KBF in the in-
terface for connecting module atop GOT.
I
' 1
Firmly fix it in place by tightening the module fixed screws within
the range of specified torque, 39 to 59 N a n (4 to 6 kgcm).
P
1
To remove the module, loosen the screw, and then reverse
the installation procedure.
5 - 17