Mitsubishi 800 Series User Manual page 80

5. Handling Component Equipment Modules MELSEC GOT
Inh
Precautions regarding
r.
. .
The following precautions should be observed when handling memory cassettes.
The memory cassette
i s
made of
resinous materials,
and
should be protected from
strong shock or impact.
Do
not separate the PC8
of the memory cassette from the case, as this can result in
a breakdown.
Be careful to keep foreign matter such as wire scraps out of the memory cassette. If
foreign matter does get into the cassette, remove it right away.
When installing the memory cassette in the GOT, press it firmly against the connector.
Do not set the memory cassette on any metallic material which is or may be leaking
electricity, or
on
any wood,
plastic,
vinyl, textile, or paper surface which may conduct
static electricity.
Do not touch the leads of the memory cassette. This can cause the memory to be
destroyed.
Do not touch the connector that connects the memory cassette to the GOT. Touch-
ing this connector can cause defective contact.
5 - 3