Mitsubishi 800 Series User Manual page 6

A
CAUTION
0 Never disassemble or modify the GOT main module, power supply modue, communication mod-
ule, optional module, memory cassette, and memory card. This may cause failure, malfunctions,
injury, and/or fire.
0 Don't touch the conductive parts and electronic parts of the GOT main module, power supply
module, communication module, optional module, or the memory cassette directly. This may
cause the module to malfunction or failure.
0 Bacause they are made of resin, don't drop or given a strong shock to the GOT main module,
power supply module, communication module, optional module, and memory cassette.
This may cause failure.
[DISPOSAL PRECAUTIONS]
A
CAUTION
I
0 When disposing of this product, treat it as industrial waste.
I
[PRECAUTIONS WHEN REPLACING THE BACKLIGHT1
0 Make sure to switch all phases of the external GOT's power supply off (When the GOT is con-
nected to a bus, turn off the PC's CPU power) before replacing the backlight, and first remove the
GOT main module from the panel. If you do not switch off the external power supply, it will cause
electric shock. If left in the panel, the GOT could fall and cause an injury.
ACAUTION
0 Do not touch the GOT's circuit board or electronic components when replacing the backlight.
Doing so could cause failure or malfunction.
0 Be sure to take the following precautions when replacing the TFT backlight (A8GT-70LTT).
Wear gloves or finger socks when replacing the backlight.
This may cause an injury.
Replace the backlight after waiting 5 or more minutes after turning the GOT's power off. The
heat from the backlight can cause bums.
[PRECAUTIONS WHEN DISPOSING THE BACKLIGHT]
A
CAUTION
0
When disposing the backlight, treat it as industrial waste.